ICEFALL 6-24 AI PRO + Hydrobox 380V
€10 035,00
Rated power 17 (6.0–24.06) kW
High power 3-phase Single-circuit
Energy class 35 / 55 °C: A+++ / A+++
Operating range −30 ~ +45 °C
Maximum outlet temperature: +80 °C
Description
ICEFALL 6-24 AI PRO heat pump + Hydrobox
The inverter air-to-water heat pump is a combination of all modern elements, specially designed for northern markets. The Flixx ICEFALL 6-24 AI PRO heat pump + Hydrobox is the ideal set for renovating an existing heating system or building a new one. By adding a hydrobox or a multifunctional all-in-one device to the ICEFALL 6-24 AI PRO heat pump , you get an efficient solution for the heating system of a medium-sized private house. Just add a buffer tank and, if necessary, a domestic hot water tank.
Advantages:
Artificial Intelligence Energy Management
Real-time optimization trained on over 25,000 heat pumps. Maximizes COP in any climate.
Dynamic network adaptation
Integrates European dynamic electricity tariffs – automatically adjusts the compressor to reduce running costs.
R290 leak protection
Real-time refrigerant monitoring. Automatic shutdown + simultaneous warning in the controller and app.
Predictive maintenance
Artificial intelligence failure prediction 1 hour in advance. Automatic intervention minimizes downtime and on-site specialist visits.
EVI – 80°C/−30°C
EVI compressor with 30% higher COP. A+++ at 35°C and 55°C. Discharge temperature up to 80°C.
31 dB(A) – ülivaikne
Full suspension compressor + composite sound insulation. Night mode.
φ5 uimtoru — +20% COP
Industry’s first φ5 copper strips compared to φ7 R32 designs. Higher heat transfer coefficient.
Service-friendly design
Side panel PCB access. Snap-on assembly. 60% core component similarity between models.
SPETCIFICATIONS:
| ICEFALL 6-24 AI PRO | |
| Energy class 35/55 °C | A+++ / A+++ |
| Operating range | −30 to +45 °C |
| Max outlet temp. | 80 °C |
| Nominal capacity A7/W35, kW | 17 |
| COP at nominal (A7/W35) | 4.71 |
| Heating range A7/W35, kW | 6.0–24.06 |
| COP at nominal (A7/W55) | 3.25 |
| Heating range A7/W55, kW | 6.0–22.69 |
| Heating BOOST @ −15 °C/W35, kW | 14.23 |
| Heating BOOST @ −15 °C/W55, kW | 14.04 |
| SCOP at 35 °C | 5.17 |
| SCOP at 55 °C | 3.97 |
| Cooling capacity range, kW | 4.0–18.0 |
| Cooling power input range, kW | 1.7–7.2 |
| Compressor | Twin Rotary EVI · GMCC |
| Fan type | DC Motor |
| Max power / current, kW / A | 9.71 / 15.00 |
| Refrigerant / charge | R290 / 1.3 kg |
| Power supply | 380–415 / 3N~ / 50 |
| Water connection | G 1″ |
| Rated water flow, m³/h | 2.92 |
| Pump head @ rated flow, m | 10.4 |
| Sound pressure @ 1 m, dB(A) | 45 |
| Sound power (EN 12102), dB(A) | 51 |
| Net weight, kg | 200 |
| Dimensions L×W×H, mm | 1370×590×1335 |
Smart Ecosystem
Hydrobox
Offers optimized and elegant solutions for heating, cooling and hot water in one compact unit.
The hydrobox is specially designed to increase flexibility and reduce installation costs.
The hydrobox can be combined with any domestic heat pump, such as Flurry, Blizzard, Aurora.
When installing the unit, the installer must connect the heat pump directly to the hydrobox, taking into account the need to add a buffer tank (for space heating/cooling) and, if necessary, a domestic hot water tank.
Attention! To prepare domestic hot water, a separate tank with a spiral heat exchanger is required, in which a temperature sensor must be installed.
| Rated voltage / frequency | 380-415V~ / 3N~ / 50Hz |
| Hydraulics & electric backup | |
| Water temperature range, °C | 5–80 |
| Filling / drain connection | 3/4″ |
| Water connections (HP / heating / DHW side) | 1″ / 1″ / 1″ |
| Max. water pressure, bar | 3 |
| Expansion tank / safety valve | 10 L / 3 bar |
| DHW heater contactor / 3-way valve / flow meter | Yes / Yes / Yes |
| Unit dimensions (L x W x H) | 665 x 485 x 295 mm |
FLIXX offers the BLIZZARD monoblock heat pump (without circulation pump) and the HydroBox. The HydroBox Flixx-10 includes:
- one small built-in buffer tank,
- one circulation water pump, one space heating/cooling circulation water pump,
- one hot water pump, safety valve,
- water filling valve and expansion tank,
- electric heater.
When installing the unit, the installer should connect the heat pump directly to the hydrobox, while considering whether or not to add a buffer tank (for space heating/cooling).
NB! A water tank is required for domestic hot water use. A temperature sensor should be added to the storage water tank.
In addition to the heat pump unit, the HydroBox Flixx-10 is integrated with all key components, including a water pump, valves, filters, constant pressure water filling unit, electrical control unit, etc. This unit has one of the slimmest designs on the market with a depth of 295 mm.
Kit installation diagram
Smart touch screen
Smart management
Installation example
