Flixx Blizzard GX 2-10 + Hydrobox 380V black

Description

Flixx Blizzard GX 2-10 R290 heat pump + Hydrobox

The Flixx Blizzard GX 2-10 R290 heat pump + Hydrobox is the ideal set for renovating an existing heating system or building a new one. By adding a hydrobox or a multifunctional all-in-one device to the Flixx Blizzard GX 2-10 heat pump , you get an efficient solution for the heating system of a medium-sized private house. Just add a buffer tank and, if necessary, a domestic hot water tank.

Advantages:

R290 natural refrigerant GWP = 3 vs. 675 for R32. No ODP. ~40% lower cost for the same output power – with an environmentally friendly design.	A+++ / A++ energy efficiency Highest energy class at 35 °C, A++ at 55 °C. COP ≥ 4.0 up to 75% savings compared to electric heating.	Operates to -25°C Full low-temperature operation, proven in Nordic & Baltic winters. Backup-heat integration for extreme cold.	Triple Full Inverter Inverter compressor + DC fan motor + inverter circulation pump. No on/off cycling, stable comfort.
DHW up to 75 °C High-temperature hot water with anti-Legionella disinfection for clean, sanitary water.	45–48 dB(A) Low Noise Soundproof compressor isolation + shock-absorption base. Neighbour-friendly residential installation.	PV & Smart-Grid Ready PV self-consumption, EMS compatibility & SG-Ready mainboard for demand-response energy management.	Dual Zone Control Independent control of two heating circuits – radiators, fan coil and underfloor heating.

HEATING — A 7 / W 35 EN 14511
Nominal heating capacity, kW	7
Heating capacity range, kW	1.80-9.60
Heating power input range, kW	0.49-2.35
HEATING — A 7 / W 55 EN 14511
Nominal capacity, kW	7
Heating capacity range, kW	2.25-8.30
Heating power input range, kW	0.93-3.09
SEASONAL EFFICIENCY · AVERAGE CLIMATE EN 14825  HP KEYMARK
SCOP / ηs at 35 °C, — / %	4.78 / 188
SCOP / ηs at 55 °C, — / %	3.51 / 138
Energy class at 35 °C / 55 °C	A+++ / A++
COOLING — A 35/ W 7
Cooling capacity range, kW	1.60-6.75
Cooling power input range, kW	0.60-2.65
COMPRESSOR G ELECTRICAL
Compressor brand	GMCC
Fan motor type	DC inverter
Power supply	220-240 V~ / 50 Hz
Max. power / current input, kW / A	03.09.2017
Refrigerant type / charge, kg	R290 / 0.65
HYDRAULICS
Rated water flow, m³/h	1,2
Water pressure drop @ rated flow, kPa	15
Pump head @ rated flow, m	7,5
ACOUSTICS G OPERATING CONDITIONS
Sound pressure @ 1 m, dB(A)	45
Sound power (EN 12102), dB(A)	60
Operating ambient temperature, °C	−25 to +43
Max. outlet water temperature, °C	75
PACKAGING
Shipping dimensions L×W×H, mm	1300×485×935

 

---

More information >>

---

Installation example

 

---

Hydrobox

Offers optimized and elegant solutions for heating, cooling and hot water in one compact unit.
The hydrobox is specially designed to increase flexibility and reduce installation costs.
The hydrobox can be combined with any domestic heat pump, such as Flurry, Blizzard, Aurora.
When installing the unit, the installer must connect the heat pump directly to the hydrobox, taking into account the need to add a buffer tank (for space heating/cooling) and, if necessary, a domestic hot water tank.

Attention! To prepare domestic hot water, a separate tank with a spiral heat exchanger is required, in which a temperature sensor must be installed.

Rated voltage / frequency	380-415V~ / 3N~ / 50Hz
Hydraulics & electric backup
Water temperature range, °C	5–80
Filling / drain connection	3/4″
Water connections (HP / heating / DHW side)	1″ / 1″ / 1″
Max. water pressure, bar	3
Expansion tank / safety valve	10 L / 3 bar
DHW heater contactor / 3-way valve / flow meter	Yes / Yes / Yes
Unit dimensions (L x W x H)	665 x 485 x 295 mm

---

 

FLIXX offers the BLIZZARD monoblock heat pump (without circulation pump) and the HydroBox. The HydroBox Flixx-10 includes:

• one small built-in buffer tank,
• one circulation water pump, one space heating/cooling circulation water pump,
• one hot water pump, safety valve,
• water filling valve and expansion tank,
• electric heater.

When installing the unit, the installer should connect the heat pump directly to the hydrobox, while considering whether or not to add a buffer tank (for space heating/cooling).

NB! A water tank is required for domestic hot water use. A temperature sensor should be added to the storage water tank.

In addition to the heat pump unit, the HydroBox Flixx-10 is integrated with all key components, including a water pump, valves, filters, constant pressure water filling unit, electrical control unit, etc. This unit has one of the slimmest designs on the market with a depth of 295 mm.

More information >>

Kit installation diagram

Smart touch screen

Smart management

 

Installation example